Phytec kitCON-161CS, Руководство по оборудованию

Страница: 8 / 62

kitCON-161CS/JC/JI
2 
PHYTEC Meßtechnik GmbH 1999 L-356e_2
The kitCON-161CS/JC/JI offers the following features:
•
Evaluation Board in EURO-card format 160 x 100 mm, including
wrap-field (45 x 68 mm) for easy layout of user circuitry
•
Improved interference safety through multi-layer technology
•
Requires single unregulated 8 V to 12 V=/500 mA power source
•
256 kByte Flash on board (PLCC-package)(optionally expandable
to up to 1 MB)
1
•
on-board Flash-programming
•
No need for a dedicated programming voltage through use of 5 V-
Flash devices
•
64 kByte SRAM on board (optionally expandable to up to 1 MB)
1
•
All controller ports, as well as data and address lines, are extended
from the controller to the pins of the kitCON-Connector in the
middle of the board
•
first RS-232 serial interface, available at DB9-socket P1
•
second RS-232 serial interface, available at X1
•
first CAN-interface, available at DB9-plug P2 (C161CS and JC)
•
second CAN-interface (C161CS) or J1850-interface (C161JC and
JI), available at DB9-plug P3
•
Two LED’s to display the board’s status
•
Eight freely programmable LEDs at Port 2.8 - 2.15
•
Up to four free Chip-Select signals for easy connection of periph-
eral devices (controller-dependent)
•
Provision for operating the board with an ICE/connect-16x for
easy emulation of the controller
1
For more information about additional configurations see the PHYTEC product catalog