Phytec kitCON-161CS, Руководство по оборудованию

Страница: 3 / 62

Contents

PHYTEC Meßtechnik GmbH 1999 L-356e_2
Preface ...........................................................................................................1
1
Introduction to the kitCON-161CS/JC/JI .........................................1
1.1
Block Diagram..............................................................................3
1.2 Overview of the kitCON-161CS/JC/JI .........................................4
2 Quickstart Instructions .......................................................................5
2.1
Starting the kitCON using a Monitor program .............................6
2.2 Starting the kitCON and programming the Flash .........................9
2.3 Internal Flash memory programming .........................................12
3 Pinout..................................................................................................13
3.1
Power Connectors X5, X4 ..........................................................14
3.1.1
Connecting via VG96-connector X4 .............................14
3.1.2 Connection via the Low Voltage Socket X5 .................14
3.2 The kitCON-Connector ..............................................................15
3.3 The ICE/connect-16x..................................................................16
3.4 The DB9-socket P1.....................................................................18
3.5 The DB9-plug P2........................................................................18
3.6 The DB9-plug P3........................................................................19
3.7 Pin Row X1 (RS-232_1).............................................................20
3.8 The connectors PFO and WDI....................................................20
3.9 Connector X7..............................................................................21
4 Jumper................................................................................................23
4.1
Program Storage JP1..................................................................25
4.2 DB9-plug P3 JP2, JP4, JP9........................................................26
4.3 DB9-plug P2 JP3 .......................................................................26
4.4 Supply voltage of the CAN-Interface JP5, JP6 ..........................27
4.5 Connection of the CAN-Interfaces JP7 .....................................27
4.6 J1850-Driver Function JP8 ........................................................28
4.7 Supply voltage of the J1850-Driver JP10 ..................................28
4.8 Configuration of ports P4.4 – P4.7 JP11, JP12 .........................29
4.9 Configuration of the Chip-Select Signals /CS0, /CS1 JP13 ......30
4.10 Memory Size J3 .........................................................................30
4.11 Reference Voltage of the A/D Converter J11, J12 .....................31
4.12 Configuration during System Reset DIP-Switch S3..................31
4.12.1 Boot-Switch S3 (switch 1)............................................32
4.12.2 Chip-Select Signals S3 (switch 2 and 3) .......................33
4.12.3 Segment Address Lines S3 (switch 4 and 5) .................33
4.12.4 Clock MODE S3 (switch 6, 7 and 8)............................34
5 Memory Models .................................................................................35
6 Flash Memory ....................................................................................39
6.1
Internal Flash ..............................................................................39