Owners manual
11
Revision 5
September 2015
ENGLISH
1.
2.
Make sure the back’s interface does not touch the backs mounts. (If it
does, slightly move forward the back plate so that the receptacles slide into
the grooves.)
3.
Tighten securely all four screws
A
.
A
A
A
A
6.3 Depth Adjustment
The selection of the back format is measured
according to the width of the wheelchair. The
back can be installed on a wheelchair that
has the same width or a wheelchair with 2
larger width formats.
Depth Chart
* 12” and 20” are unavailable for the sport version. These dimensions may vary of ± 1/16 in (0.16 cm). The
measures in table 3 include the Sunmate soft cushion of 1 inch. The depth measure is taken from the front of
the back mounts. ** OPTION, Adjustment Extension.
12*
14
16
18
20
*
12
-1 to +2 ½ in
13
-1 ½ to + 2 in
14
** -2 to +1 ½ in -1 to +2 ½ in
15
-1 ½ to + 2 in
16
** -2 to +1 ½ in
-1 to +2 ½ in
17
-1 ½ to + 2 in
18
** -2 to +1 ½ in
-1 to +2 ½ in
19
-1 ½ to + 2 in
20
** -2 to +1 ½ in
-1 to +2 ½ in
21
-1 ½ to + 2 in
HP2 back width
Ex
ternal width of the wheelchair
Technical diagram
