HP2 Back
10
ENGLISH
6. Adjusting HP2 back height, depth and angle
6.1 Height Adjustment
1.
Loosen screws
A
and adjust the height of the back shell to
required position.
2.
Securely tighten screws
A
.
Note – After height adjustment is complete, make sure the width was not
inadvertently changed.
6.2 Tightening the receptacle anchors
The height of the receptacle anchors has been identified. Those anchors should now
be solidly fastened to the back. (It is important to first make sure the back is placed
into its anchors.)
1. Slide the receptacle into the grooves until the correct height has been reached.
Make sure it is the same height on both sides.
A
A
