Owners manual
7
Revision 5
September 2015
ENGLISH
5.2 Hardware installation instructions
Note - The following steps must be done before the client is in the wheelchair.
1.
Loosen the clamp screws
A
with the enclosed
4 mm Allen key
2.
Open the clamp
3.
Determine the desired location of the receivers on the wheelchair back
canes. Attach and align receiver to the wheelchair back canes. Tighten
both clamp screws
A
.
4.
Repeat the process for the second anchoring point.
5.
Make sure the mounting hardware is set at equal heights on each back
canes and parallel to the seat frame.
The head of screws
A
must always point towards the
outside of the wheelchair.
A
A
A
