HP2 Back
12
ENGLISH
Depth Adjustments
1.
Loosen screws
E
on each hardware to let the back slide freely. (It is important to
loosen both sides to adjust easily the depth).
2.
Slide the back fore and aft until the desired depth has been reached and securely
tighten screws
E
.
It is important to note that if the depth of the HP2 back is not equal
to zero, then the seat depth will be modified. If the depth of the back
is negative, the seat will seem too far back, and if it is positive, it will
seem too far out.
E
A security mechanism has been installed on the sliding fasteners. It is
therefore impossible for the back installed on a wheelchair to come
out of its anchors, even in the event of a violent spasm.
