Phybridge PoLRE, Руководство по установке

Страница: 36 / 49

30
3 . I N S T A L L A T I O N
C o n n e c t i n g t o t h e I P P B X
Installing the Fiber Optic Cable
To connect the PoLRE switch to the uplink network switch or IP PBX using a fiber optic cable:
1.
Remove the black protective cap from the SFP transceiver module.
WARNING : DO NOT look into the SFP connector when it is installed in a Gbic port, as the
laser beam can cause serious eye injury.
2. Connect your fiber optic cable to port Gbic 1 or Gbic 2 on the front panel of the PoLRE switch.
Note : Both ports can be used. If only one connection will be installed, use the port labelled
GbE 1 .