Phybridge PoLRE, Руководство по установке

Страница: 34 / 49

28
3 . I N S T A L L A T I O N
C o n n e c t i n g t o t h e I P P B X
Installing the SFP Transceiver Modules
To install an SFP module:
1. Remove the SFP module from its protective packaging, but DO NOT remove the black protective cap.
Small particles of dust can interfere with proper operation of the SFP module.
2. Open the locking mechanism on the SFP module by pulling it down over the black cap. When open, it
can be used as a handle for inserting or removing the SFP module.
3. Determine which Gbic port will be installed with this SFP module.
-
For the upper port, Gbic 1 , position the SFP module so that its handle is at the top, facing up.
-
For the lower port,
Gbic 2
, the SFP module must be turned upside down, with its handle at the
bottom.
4. Align the SFP module in front of the desired Gbic port slot, and slide the module all the way in.
Note : When fully inserted, the SFP module extends slightly from the Gbic port.