Phonetics Sensaphone SCADA 3000, Руководство пользователя

Страница: 34 / 336

3. Online Timeout: Automatically logs you off if there are no communication
requests from the computer within the specified time period. The default
setting is 4 minutes. Range: 0–255, with “0” representing a disabled setting.
Click OK .
I/O Programming
Click on the first of the three Motherboard and Module I/O programming buttons
to bring up the I/O form for the first 8 inputs, the second button for the next 8 inputs and the
third button for the 8 outputs.
Figure 7: I/O Points
The form above shows the first eight inputs on the main unit, 0–7, retrieved by clicking on the
first of the three buttons.
Click the
“I/O Setup”
button to open the setup form. Here you assign each input a name, a
type, and the units of measurement applying to that type.
To set the Low and High values for inputs, and the calibration factor if any, click on the
“Table
and Cal”
button.
Click on OK to close the form once you’ve programmed your inputs.
2-4
SCADA 3000 User’s Manual