Phoenix Contact 1624130, Руководство пользователя

Страница: 64 / 75

EV - PLCC - AC1 - DC1
64 / 74
PHOENIX CONTACT 107068_en_06
CAN bus interface
Number of interfaces 1 (transparent mode, CAN 2.0a, 11-bit object identifier, CAN
2.0b, 29-bit object identifier)
Connection method COMBICON connector
Transmission speed 500 kbps (default)
125 kbps, 250 kbps, 1000 kbps (can be set)
Transmission length 3 m, maximum (with shielded cable: 30 m, maximum)
Termination resistor 120 Ω (can be switched internally)
Wireless interface
This device fulfils Part 15 of the Code of Federal Regulations (CFR) 47.
FCC-ID: RI7HE910.
Frequency 850 MHz (0.25 W (UMTS))
1900 MHz (0.25 W (UMTS))
2100 MHz (0.25 W (UMTS))
Antenna Maximum cable length: 30 m
Impedance 50 Ω
Connection method SMA (female)
SIM interface 1.8 V and 3 V SIM card
GPRS Class 12, Class B
EDGE Multislot Class 10
UMTS HSPA 3GPP R6
Supported protocols OCPP 1.6J
Controller supply
Supply voltage 24 V DC (maximum cable length: 30 m)
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including resid -
ual ripple)
Residual ripple, related to measured value 5%
Voltage supply range U
M
of digital inputs 24 V DC -15% / +20% (in accordance with EN 61131-2)
Power supply at U
M
8 A DC, maximum (sum of U
M
+ U
S
)
Current consumption from U
M
8 A DC, maximum
Supply of segment circuit U
S
of digital outputs 24 V DC -15% / +20% (in accordance with EN 61131-2)
NOTE:
Fuse supply voltage US of digital outputs US externally. The power supply unit must be able to supply four
times the nominal current of the external fuse, to ensure that the fuse blows safely in the event of an error.
Power supply at U
S
8 A DC, maximum (sum of U
M
+ U
S
)
Current consumption from U
S
8 A DC, maximum
Supply voltage U
L
24 V DC
Power supply at U
L
0.8 A DC, maximum