Phoenix Contact 1624130, Руководство пользователя

Страница: 29 / 75

Description of the EV - PLCC - AC1 - DC1
107068_en_06 PHOENIX CONTACT
29 / 74
3.8.4 CAN bus interface
A CAN master interface is available for controlling CAN bus devices.
Figure 3 - 13 Terminal point assignment of the CAN master interface
The CAN master interface has the following properties:
– Transparent mode
– Transmission speed: 500 kbps (default). In addition, 125 kbps, 250 kbps, or 1000 kbps
can be set.
– Internal termination resistor can be connected via bridges
Figure 3 - 14 Connection of a CAN device, termination resistor wired in the
charging controller
Table 3 - 7 Terminal point assignment of the CAN master interface
Terminal point Assignment Description
1.1 R- Termination resistor, can be bridged to terminal point
1.2
1.2 CAN-L Non-inverted CAN signal
1.3 CAN-GND Ground
1.4 CAN-H Inverted CAN signal
1.5 R+ Termination resistor, can be bridged to terminal point
1.4
EV
CH
A
R
GE
CON
T
RO
L
X2.2 X3 X4
RS232 RS485 RS485
X5
COM
X7
SD CARD
Digital OUT X11 Digital IN X10
SIM ANT
UL
UM
US
FR
FF
E
RS232-1
RS232-2
RS485-1
RS485-2
CAN
GSM St.
GSM TR.
Error
Plug
Charge
PLC
Error
Plug
Charge
1.1 1.2 1.3 1.4 1.5
X5
107068A006
X2.2 X3 X4
RS232 RS485 CAN
X5
X 3 X 4
X 5
X 2.2
C
AN-L
C
AN-GND
C
AN-H