Phoenix Contact 1624130, Руководство пользователя

Страница: 25 / 75

Description of the EV - PLCC - AC1 - DC1
107068_en_06 PHOENIX CONTACT
25 / 74
3.8 Communication interfaces
3.8.1 Ethernet interfaces
Two standardized Ethernet interfaces are available for connecting the Ethernet network.
The Ethernet network is connected via RJ45 jacks.
Contact assignment of the Ethernet interfaces is as follows:
• Use an Ethernet cable that at least complies with CAT5 of IEEE 802.3.
• Observe the bending radii of the Ethernet cables used.
The Ethernet interfaces are capable of swapping the transmitter and receiver automati -
cally (auto crossover).
Transmit data + T + 1
Figure 3 - 7 Ethernet interface
Transmit data - T - 2
Receive data + R + 3
– 4
– 5
Receive data - R - 6
– 7
– 8
Note about the IP address of the controller:
Up to and including firmware version 1.04, the controller has no default IP address in de -
livery state. Starting with firmware version 1.05, the default IP address of the controller is
192.168.0.8.
When updating the controller to firmware version >1.05, the IP address allocated earlier
remains unchanged.
R J4 5 Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8