Philips Saeco Moltio, Руководство по обслуживанию

Страница: 38 / 66

MOLTIO 05 SERVICE MODE
7/13
5.1.2. Test mode in Moltio Automatic and Classic
Classic
Automatic
To enter Test Mode
The machine enters Test Mode by holding pressed together ESPRESSO and STAND-BY while
switching on the machine by mean of the main switch on the backside of the machine. Once en-
tered in Test Mode, the display shows the firmware version.
The Test Mode is organized into
6 different pages :
(press AROMA to move to the next screen)
Page 0: The display shows:
a) Firmware version.
b) Type.
c) “230”/”120” if the machine is a 230V or 120V model.
d) Main supply frequency (50 or 60 Hz).
Page 1: Keyboard and display’s colour test:
a) Espresso button
b) Coffe button
c) Cappuccino/Water or Steam/Water button
d) Aroma button
e) Menu button
f) Stand-by button
g) Unused button
h) Backlight colors
Page 2: Input signals test:
a) Water level sensor
b) Microswitch door closed/opened ( if the dregdrawer is not present , the display indication
is always “N” )
c) Microswitch presence of the Brew Unit
d) Microswitch presence of the Dregdrawer
Page 3: Low voltage loads test:
a) Brew Unit movement upward and downward (24V DC)
Page 4: High/Low voltage loads test (Pump, E.Valve ) :
a) Pump (120-230V AC)
b) Electro Valve (24Vdc) ( The door microswitch and the dregdrawer microswitch must be
closed
)
Page 5 : High voltage loads test (Heater, Grinder, Protection cover coffee beans ):
a) Heater (120-230V AC)
b) Grinder (170-320V DC)
c) Cover ON/OFF
Page 6: Values Autodose
a) Value Autodose for each selection of beans