Philips Saeco Moltio, Руководство по обслуживанию

Страница: 33 / 66

MOLTIO 05 SERVICE MODE
2/13
Firmware Software version
Firmware version on the display.
The machine model is shown (Higo Carafe).
The voltage of the main supply “230V/120V”
The frequency of the main supply is shown (50 or 60 Hz)
Press buttons from 1 to 6
When a button is pressed the letter next to it varies from N to Y.
Pressing button 1 the backlight color changes from GREEN to RED.
Pressing button 2 the backlight color changes from GREEN to YELLOW.
The button 4 is pressed at the end because it takes you to the next page
ERROR :
The letters do not change from Y or N and Y are always, in this case need to check the flat cabe
communication with the CPU-Power, but if it does not change color also need to check the wiring
JP4.
Start condition
Start condition
Operational check – keys
Press CAPPUCCINO to move to the next screen
Press CAPPUCCINO to move to the next screen
Insert a full Water Tank
The indication TANK-H20 changes from “N” to “Y”.
NOTE:
the switching from “N” to “Y” requires about 1-2 seconds.
ERROR:
The indication TANK-H2O doesn’t change; check the
capacitive sensor (fixing) and the wiring (JP23)
Insert the BrewUnit
The indications BU-P changes from “N” to “Y”.
NOTE: removing the BrewUnit the indication from “Y” to “N” requires
about 2-3 seconds to switch.
ERROR
: Check the BU presence Microswitch and the wiring (JP16).
Operational check microswitches and sensors