Philips Saeco Moltio, Руководство по обслуживанию

Страница: 40 / 66

MOLTIO 05 SERVICE MODE
9/13
Press AROMA to move to the next screen
Start condition
Insert the BrewUnit
The indications BU-P changes from “N” to “Y”.
NOTE: removing the BrewUnit the indication from “Y” to “N” requires
about 2-3 seconds to switch.
ERROR : Check the BU presence Microswitch and the wiring (JP16).
Press the ESPRESSO button to move the BU to Work
IMPORTANT NOTE
: If the DREGDRAWER is not inserted or the
DOOR is not closed the BU test cannot be performed. If these 2
inputs are not in the right position, a warning message will be shown
and the display turns to yellow..
When the BU reaches the work position the indication WORK
changes from “N” to “Y”, the number of the current is minus than
200mA (without BU) or 300mA (with BU).
ERROR
: The indication
WORK
doesn’t change and remain “N”, the
display backlight changes from green to red; Check the work
microswitch (broken?), the BU motor (blocked?) and the wiring
(JP16).
ERROR
:
(Without BU)
The absorbed current is more than 200mA,
the display backlight changes from green to red; check the BU and
the motor.
ERROR
:
(With BU)
The absorbed current is more than 300mA, the
display backlight changes from green to red; check the BU and the
motor.
Close the Door ( Dreg Drawer must be inserted )
The indication DOOR change from “N” to “Y”
ERROR : The indication DOOR does not change; check the
Microswitch for the door and the wiring (JP14). NOTE: without the
Dreg Drawer correctly inserted the DOOR indication cannot change !
Operational check – brewing unit