Philips Saeco Moltio, Руководство по обслуживанию

Страница: 17 / 66

MOLTIO 03 BRIEF INSTRUCTIONS
2/5
The machine is programming the
amount of coffee to dispense for
the cappuccino.
The machine is programming the
amount of milk to dispense for the
hot milk.
The machine will remind the user
that the carafe must be inserted.
The machine is brewing Latte
Macchiato.
The machine is programming the
amount of milk to dispense for the
Latte Macchiato.
The machine is programming the
amount of coffee to dispense for
the Latte Macchiato.
Machine ready signals (
YELLOW colour
)
Insert the water dispensing spout
and press the “ ” button to
start dispensing.
Press “ ” to exit.
Refi ll the coffee bean hopper
with coffee beans and restart the
cycle.
Prime the circuit.
The brew group is being reset
due to machine reset.
The machine needs to be descaled. Press the “ ” button to start the descaling
process. Follow the steps described in the descaling chapter of this manual.
If you want to descale later, press the “ ” button to continue using the
machine.
Please note that not descaling your machine will ultimately make it
stop working properly. In this case repair is NOT covered under your
warranty.
The machine is heating up to
brew beverages or dispense hot
water.
The machine is heating up during
beverages programming.
The machine is performing the
rinse cycle. Wait until the machine
has completed the cycle.
The machine needs the
“” water filter to be
replaced.
Machine ready signals ( RED colour )
Close the service door.
Fill the coffee bean hopper.
The brew group must be inserted
into the machine.
Insert the coffee grounds
drawer.
Empty the coffee grounds drawer
and the coffee residues drawer.
Fully insert the coffee grounds
drawer before turning the
machine off.