9
Inst
al
la
ti
on
Power supply
Connect the power supply unit to the back of
your MF-JET 450 (at the side), then use the
mains cable to connect the power supply unit to
the mains.
After you have connected the multifunctional
device to the mains, it will prompt you to make
some basic settings as follows:
Country selection
1
Press
OK
.
2
Use
/
to choose your country.
3
Press
OK
twice.
Inserting cartridges
Before you can receive or copy documents there
must be ink cartridges in your MF-JET 450. Two
starter cartridges (black and colour) have there-
fore been included to cover a few test pages.
1
Open the machine by pulling the lever under
the control panel.
2
Press the lever in the middle of the cartridge
holder to open the holder.
3
Take the ink cartridges out of their packaging
and remove the protective strip.
v
Please make sure that the protective strip
was removed completely.
Be careful not to touch the nozzle or the
contacts!
4
Insert the
black
cartridge “nose” down in
the
right
-hand compartment of the cartridge
holder.
5
Insert the
colour
cartridge in the same way
in the
left
-hand compartment.
6
Close the cartridge holder. You’ll hear a click
when it snaps shut.
7
Close the machine.
Содержание MF-JET 450
Страница 1: ...PHILIPS ...
Страница 18: ...18 Directory You can edit groups in the register window named List ...