Philips HTS6100, Быстрый старт

Страница: 35 / 54

English
EN 35
Pl
ay
Listen to radio
1
Press RADIO repeatedly to select ‘FM’ or
‘AM/MW’ band.
2
Use the remote control to control the
radio.
Button Action
Select a preset radio station.
m M
Tune the radio frequency
backward/ forward.
Toggle between FM stereo
and FM mono mode.
Press and hold this button to
delete the preset station from
the preset list.
The preset number for
other radio stations
remain unchanged •
Reinstall all the radio stations
1
Press RADIO repeatedly to select ‘FM’ or
‘AM/MW’ band.
2
Press and hold
PROGRAM
until
‘STARTING INSTALL’ is displayed.
All previously stored radio stations will
be replaced.
Note
If no stereo signal is detected or less than 5 stations
are detected during radio installation, ‘CHECK
ANTENNA’ is displayed.
•
Search and store radio stations
individually
1
Press RADIO repeatedly to select ‘FM’ or
‘AM/MW’ band.
2
Press
m M
.
The radio frequency indication starts to
change until a radio station is detected.
3
Repeat step 2 until you tune to the radio
station you wish to store.
To fi netune the radio frequency, press
vV
.
4
Press PROGRAM .
If no action is carried out within 20
seconds after the above step, it exits
the preset mode.
5
Press
í ë
(or the number buttons ) to
select a preset number to store.
6
Press PROGRAM to con fi rm.
Change tuning grid
In some countries, the frequency step between
adjacent channels in FM band is 50 kHz or
100 kHz (AM/MW band is 9 kHz or 10 kHz).
Note
This feature only applicable for certain region.
Change tuning grid erases all preset radio stations.
•
•
1
Press
RADIO
repeatedly to select ‘FM’ or
‘AM/MW’ band.
2
Press
x
.
3
Press and hold
u
until ‘GRID 9’ or
‘GRID 10’ is displayed.
‘GRID 9’ for FM 50 kHz (or AM 9 kHz)
and ‘GRID 10’ for FM 100 kHz (or AM
10 kHz).
•
•
•