Philips HTB4520, Руководство пользователя

Страница: 30 / 46

28
EN
Energy saving settings
1
Press (
Home
).
2
Select [Setup] , and then press OK .
3
Select
[Preference]
, and then press
OK
.
4
Press the
Navigation buttons
and
OK
to
select and change:
• [Screen saver] : Switch the home
theater to screen saver mode after
10 minutes of inactivity.
• [Auto standby] : Switch the home
theater to standby after 30 minutes of
inactivity. This timer works only when a
disc or USB play is paused or stopped.
•
[Sleep timer]
: Set the duration of the
sleep timer so that the home theater is
switched to standby after the specified
period.
Speaker settings
1
Press ( Home ).
2
Select
[Setup]
, and then press
OK
.
3
Select [Advanced] , and then press OK .
4
Press the
Navigation buttons
and
OK
to
select and change:
•
[Enhanced audio]
: Select
[On]
to
enable audio post processing at the
speaker and enable karaoke settings
(if your product supports Karaoke).
To play the original audio of the disc,
select
[Off]
.
Tip
•
Enable audio post processing before you select a
predefined sound mode (see 'Sound mode' on page
25).
Restore default settings
1
Press (
Home
).
2
Select [Setup] , and then press OK .
3
Select
[Advanced]
>
[Restore default
settings]
, and then press
OK
.
4
Select [OK] , and then press OK to
confirm.
»
Your home theater is reset to its
default settings except for some
settings such as parental control and
DivX VOD registration code.