Philips Allegiant LTC 8500 Series, Инструкция по эксплуатации

Страница: 84 / 91

82
12. KEYBOARD USER FUNCTIONS
(Programming feature for system setups
which do not require changing on a daily
basis)
The Keyboard User Functions are listed below.
Note that certain functions can only be changed
by the operator with a level 1 priority. A user
function example is shown after the listing of the
table.
As an example, select a monitor to position the
overlay display on by using User Function #4. To
enter the User Function mode, press
USER , the
number 4 , then press ENTER . Now use the
joystick to position the monitor overlay display to
the desired area of the monitor. When finished,
press
ENTER to store the position, then press
USER to exit the User Function mode.
For procedures on using the other User
Functions, refer to the appropriate section of the
operating manual.
FN FUNCTION DESCRIPTION ACCESS
No. LEVEL
1. LOCAL KEYBOARD TEST Any
2. SHOW KEYBOARD NUMBER Any
3. BEEPER ON/OFF Any
4. POSITION MONITOR DISPLAY 1,7
5. DISPLAY BRIGHTNESS 1,7
6. DISPLAY ON/OFF 1,7
7. SET TIME 1,7
8. SET DATE 1,7
9. SET CAMERA TITLE 1
10. CHANGE PASSWORD Any*
11. SET TIME/DATE FORMAT 1
12. DEFAULT MONITOR DISPLAYS 1
13. CONFIGURATION TABLE PRINTOUT 1
14. NOT USED 1
15. SYSTEM RESET 1*
16. ENABLE TIMED EVENTS 1
17. SET MONITOR TITLE 1
18. SEQUENCE PRINTOUT 1
19. ALARM RESPONSE SELECTION 1*
20. SELECT PRINTING MODE 1
21. DESIGNATE MONITOR TYPE 1*
22. SELECT AutoDome SPEED TYPE 1*
23. DISPLAY CPU VERSION NUMBER Any
24. ALL MONITOR DISPLAY POSITION 1,7
25. ALL MONITOR DISPLAY BRIGHTNESS 1,7
26. ALL MONITOR DISPLAY ON/OFF 1,7
27. SELECT KEYBOARD LOG-IN 1
28. SELECT CONSOLE LOG-IN 1
29. RESET RS-232 PARAMETERS 1
30. SELECT CONSOLE RS-232 PARAMETERS 1
31. SELECT PRINTER RS-232 PARAMETERS 1
32. SELECT ALARM RS-232 PARAMETERS 1
33. DISPLAY USER NUMBER AND PRIORITY Any
* Indicates Password required