26
ROUTINE MAINTENANCE
Cleaning of evaporating tray
1.
As shown in Fig. 1, remove 2 screws on the bottom of
the unit cover and remove the unit cover.
2.
The evaporating tray is installed in the back.
Pull the clips on the both sides of the mounting plate to
loosen the mounting plate. Take out the evaporating tray
with the mounting plate as shown in Fig. 2.
3.
Dispose any accumulated water in the evaporating tray.
4.
Wash the evaporating tray with a diluted neutral
dishwashing detergent and clean water.
Never use the hot or boiling water to clean the tray.
5.
Replace the evaporating tray in it original position and
push the clips on the both sides of the mounting plate to fix
the evaporating tray.
6.
Replace the unit cover and fix it with 2 screws.
<Important>
Improper installation of mounting plate or unit cover can cause abnormal noise. Install the mounting
plate and unit cover surely and check there is no abnormal noise during operation.
Unit cover
Fig. 1
Clip Mounting
plate
Evaporating tray
Fig. 2
