37
INSTALLATION OF TEMPERATRUE RECORDER
7.
Fix the recorder sensor to the sensor fixture. [Fig. 5]
8.
Replace the insulation to the sensor port and then
replace and fix the air intake vent cover by 2 screws.
9.
Connect the recorder connector to the connector for
recorder power located at upper right inside the space for
temperature recorder. [Fig. 6]
The connector for recorder power has a connector cover.
Remove the connector cover before connection.
WARNING
Always disconnect the power supply to the unit
to
prevent electric shock or injury since the connector on the
unit is energized.
10.
Set the temperature recorder with the channel on the
recorder fitting aligned with the shaft and fix the
temperature recorder by a screw at the space for
temperature recorder. [Fig. 7]
11.
Replace the bottom shelf (bottom right drawer for
MPR-514R) in the chamber.
For MPR-514, replace the doors after setting the bottom
shelf.
Fig. 5
Recorder sensor
Sensor fixture
Sensor fixture
Fig. 6
Fig. 7
Connector for recorder power
Space for temp. recorder
Screw
Shaft
Channel
