27
ROUTINE MAINTENANCE
Cleaning of evaporating tray
1.
As shown in Fig. 1, remove 2 hand screws on the
bottom of the unit cover and remove the unit cover.
2.
The evaporating tray is installed in the back.
To remove the evaporating tray, lift slightly and pull the
evaporating tray as shown in Fig. 2.
3.
Dispose any accumulated water in the evaporating tray.
4.
Wash the evaporating tray with a diluted neutral
dishwashing detergent and clean water.
Never use the hot or boiling water to clean the tray.
5.
Replace the evaporating tray in it original position
securely.
The drain hose (black hose) is located in the back.
Check the drain hose is in the evaporating tray.
6.
Replace the unit cover and fix it with 2 hand screws.
＜
Important>
Improper installation of the evaporating tray or unit cover may cause abnormal noise. Set the
evaporating tray and unit cover surely and check there is no abnormal noise during operation.
Unit cover
Fig. 1
Evaporating tray
Fig. 2
Содержание MPR-1014 Series
Страница 2: ......
