Phase AxN series, Руководство по установке

Страница: 55 / 58

53
4.6 U1/U2
——
User Connectors
Port Location
AxN Series Drive’s User Connectors (Male Plug, 2
×
12 pin) are on the left bottom of the
Communication Port Panel. Refer to the following figure for exact location.
Pin Assignment
User Connector U1
Pin Name Function Signal Description
1 R0P Differential analog input +/-10V, Zin=10KΩ
2 R0N Differential analog input +/-10V, Zin=10KΩ
3 AO0 Programmable analog output +/-10V f.s., 30 mA
4 GND Analog reference ground Analog signals reference
5 DI0 Programmable digital input 6.6 kΩ to ground, 20-30 V
6 DI1 Programmable digital input 6.6 kΩ to ground, 20-30 V
7 DI2 Programmable digital input 6.6 kΩ to ground, 20-30 V
8 DI3 Programmable digital input 6.6 kΩ to ground, 20-30 V
9 DO0 Programmable digital output PNP open collector, 24 V, 100mA max
10 DO1 Programmable digital output PNP open collector, 24 V, 100mA max
11 24V Auxiliary supply of control circuits 22 ~ 30Vdc to Pin 12 (0V), 500mA
12 0V Auxiliary supply negative Digital signal reference