44
computer is a Data Terminal Equipment (DTE).
2.
The signal voltage is ±12V, and the max current of DTR (Pin4) is 100mA.
Minimal
"
3-wire
"
Connection
A minimal "3-wire" RS-232 connection consisting only of transmit data, receive data, and ground,
is commonly used when the full facilities of RS-232 are not required. And it also the minimal
connection requirement of Cockpit communication with AxN Series Drive.
Connection table
1)
N/C
——
No Connection;
2)
Connector back shell shielded 360
°
(Both ends);
3)
●
means that the shield or cable should connect to connectors.
Connection diagram
Содержание AxN series
