Phase AxN 70.140.4, Руководство по установке

Страница: 5 / 55

3
1 Mechanical Installation
1.1 Notes for Operation
Avoid
Please be sure to avoid:
1. penetration of damp into the device;
2. aggressive or conductive substances in the immediate vicinity;
3. explosive and flammable substances in the immediate vicinity;
4. drill chippings, screws or foreign bodies dropping into the device;
5. ventilation openings being covered over, as otherwise the device may be damaged
Note
Note the following points:
1. Make sure every part of the drive is anchored before moving the drive. Failure to comply may
result in minor or moderate injury from the drive parts falling.
2. Observe proper electrostatic discharge (ESD) procedures when handling the drive. Failure to
comply could result in ESD damage to the drive circuitry;
3. Prevent foreign matter such as metal shavings or wire clippings from falling into the drive
during installation and project construction. Failure to comply could result in damage to the
drive. Place a temporary cover over the top of the drive during installation. Remove the
temporary cover before start-up, as the cover will reduce ventilation and cause the drive to
overheat.
Install proper cooling to ensure the temperature in the enclosure does not exceed 40 °C.