PFT continuous mixer HM 2002 Overview - Operation - Spare parts lists
End of work / clean machine
2017-03-14
33
35.4 Secure against restarting
DANGER!
Danger to life from unauthorised restarting!
When working with the machine there is the risk that
the
energy
supply
is
switched
on
without
authorisation. This poses a danger to life for the
persons in danger area.
Switch off all power supplies before starting any
work and secure against restarting.
If protective covers have been removed for
cleaning purposes, they must be properly put back
again without fail after completion.
35.5 Clean HM 2002
ATTENTION!
Water can enter sensitive machine parts!
Before cleaning the machine cover all openings in
which no water must enter for safety and functional
reasons (e.g. electric motors and control cabinets).
NOTE!
Do not direct the water jet on electrical parts such as
gear motor or
ON/OFF switch
.
35.6 Cleaning the mixing shaft
Fig. 38: Loosen ring nut
1. Loosen ring nut (1).
1
