manualshive.com logo in svg

Pfeiffer Vacuum PrismaPro QMA 250 F1, Перевод оригинала

Поделиться
Скачать
Pfeiffer Vacuum PrismaPro QMA 250 F1 Скачать руководство пользователя страница 28

4 Transport and storage

4.1 Transporting the product

NOTICE

Damage caused by incorrect transportation

Transportation in unsuitable packaging, or failure to install all transport locks, can damage the prod-
uct.

► Comply with the instructions for safe transportation.

Packing

We recommend keeping the transport packaging and original protective cover.

General information regarding safe transport

► Observe the weight specified on the transport packaging.
► Where possible, always transport or ship the product in the original transport packaging.
► Always use dense and impact-proof transport packaging for the product.
► Remove the existing protective cover and transport protections only immediately prior to installa-

tion.

► Reattach transport locks and transport protections prior to each transport.

4.2 Storing the product

NOTICE

Damage caused by improper storage

Improper storage will lead to damage to the product.
Static charging, moisture, etc. lead to defects on the electronic components.

► Comply with the instructions for safe storage.

Packing

We recommend storing the product in its original packaging.

General information for safe storage

► Store the product in a cool, dry, dust-free place, where it is protected against impacts and me-

chanical vibration.

► Always use dense and impact-proof packaging for the product.
► Where possible, store the product in its original packaging.
► Store electronic components in antistatic packaging.
► Maintain the permissible storage temperature.
► Avoid extreme fluctuations of the ambient temperature.
► Avoid high air humidity.
► Seal connections with the original protective caps.
► Protect the product with the original transport protection (where available).

Transport and storage

28/86

Содержание PrismaPro QMA 250 F1

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды