Pfeiffer Vacuum HIPACE 80 NEO, Руководство по эксплуатации

Страница: 50 / 58

13 Accessories
View the range of accessories for hybrid bearing turbopumps on our website.
13.1 Accessory information
Fixing materials
Type-specific assembled packages, with centering ring and seal, ensure the secure fastening of the
vacuum pump. Optionally with splinter shield or protective screen.
Power supply packs and display units
Power supply packs for optimal voltage supply of Pfeiffer Vacuum products are characterized by their
compact size and adapted power supply with maximum reliability. Display and operating units are used
to check and adjust operating parameters.
Cable and adapter
Mains, interface, connection, and extension cables provide a secure and suitable connection. Different
lengths on request.
Venting accessories
A Pfeiffer Vacuum venting valve offers maximum operating and process security. Automatic control
through the integrated electronic drive unit of the turbopump.
Sealing gas supply
Sealing gas is used to protect the vacuum pump from dusty and corrosive processes, or excessive gas
throughputs. Sealing gas prevents the ingress of damaging substances into the motor and bearing area.
The supply is carried out either via a sealing gas valve or a sealing gas throttle without control.
Air cooling
For processes with low gas throughputs and good fore-vacuum pressure, air cooling can be used inde-
pendently of a water supply. Automatic control through the integrated electronic drive unit of the turbo-
pump.
Heating
Heating jackets enable the ultimate pressure to be reached more quickly during process cleaning. Auto-
matic control through the integrated electronic drive unit of the turbopump.
Backing pump control
The electronic drive unit of the turbopump enables useful control of backing pumps. Depending on the
backing pump used, different operating modes are available.
Integrated pressure measurement
Evaluation and control by the integrated electronic drive unit, independently of an additional power sup-
ply.
13.2 Ordering accessories
Description Order number
Mounting kit for HiPace 60/80, DN 63 ISO-K, including coated centering ring and
claws
PM 016 510 -T
Mounting kit for HiPace 60/80, DN 63 ISO-K, including coated centering ring and
bracket screws
PM 016 360 -T
Mounting kit for HiPace 60/80, DN 40 ISO-KF, including centering ring and clamp-
ing ring
PM 016 625 -T
Mounting kit for HiPace 60/80, DN 40 ISO-KF, splinter shield, clamping ring PM 016 626-T
Mounting kit for HiPace 60/80, DN 63 ISO-K, including coated centering ring and
claws
PM 016 510 -T
Hexagon Screw Set for Flanges with Through-Holes, DN 63 CF-F PM 016 683 -T
Set of stud screws for flanges with a threaded hole, DN 63 CF-F PM 016 684 -T
Accessories
50/58