Pfaff PLUSLINE 2483-3/03-980 Series, Руководство по настройке, Страница: 9 / 58

Adjustment
9
15
.06.03
Bottom transporter zero position
Rule
At stitch length setting “ 0 ”
1. The marking on the toothed segment 1 should be in the centre of the shaft of the gear
wheel 3 ,
2. The cranks 4 and 6 should be aligned and the bottom transporter should not move
when turning the handwheel.
Fig. 15 - 04
O
Switch the machine on.
O
Set the stitch length to “ 0 ” using the control panel and turn the handwheel until the feed
regulator motor responds.
O
Make sure that parameter 834 is set to “ 0 ”, see chapter 15.11 Parameter settings .
O
Adjust the toothed segment 1 ( screws 2 ) without the gear wheel 3 according to rule 1 .
O
Turn the crank
4
( screws
5
) according to
rule 2
.
O
Switch the machine off.
6
5
4
1
2
2
3