Pfaff CREATIVE 2.0 - Скачать руководство пользователя страница 60

Страница: 60 / 68

Maintenance

Is the best spool pin position used?

Try a different spool pin position (vertical or horizontal).

Is the stitch plate hole damaged?

Change the stitch plate.

Bobbin thread breaks

Did you insert the bobbin properly?

Check the bobbin thread.

Is the stitch plate hole damaged?

Change the stitch plate.

Is the bobbin area clean?

Clean lint from bobbin area and use only the original

PFAFF® bobbins approved for this model.

Is the bobbin wound correctly?

Wind a new bobbin.

The seam has uneven stitches

Is the thread tension correct?

Check needle thread tension and the threading.

Are you using too thick or slubbed thread?

Change the thread.

Is the bobbin thread evenly wound?

Check bobbin winding.

Is a correct needle used?

Insert a proper needle correctly as described in chapter 2.

The machine does not feed or feeds irregularly

Did you thread the machine properly?

Check how the machine is threaded.

Has sewing lint collected between the feed

dogs?

Remove the stitch plate and clean the feed dogs with a

brush.

The embroidery design is distorted

Is the fabric hooped properly?

The fabric must be tightly hooped.

Is the inner embroidery hoop completely

inserted in the outer embroidery hoop?

Hoop the fabric in such a way that the inner hoop

always exactly matches the outer hoop.

The embroidery design has puckered

Did you stabilize your fabric suf

ciently?

Ensure you use the proper stabilizer for your

technique or fabric type.

Thread loops are forming on the underside of the embroidery design

Has the embroidery built up too much to move

freely under the embroidery foot?

Increase the pivot height in the Settings menu in small

steps until problem is solved.

The machine will not embroider

Is the embroidery unit attached?

Make sure that the embroidery unit is properly

attached into the socket.

Is the wrong hoop attached?

Slide on the correct hoop.

Have your sewing machine serviced regularly by your local authorized PFAFF® dealer!

If you have followed this trouble shooting information and still have problems, take your sewing machine

to your dealer. If there is a speci

c problem, it is a great help to test sew with your thread on a scrap of

your sewing fabric and bring it to your dealer. A sewing sample will often give much better information

than words.

Non-original parts and accessories

The warranty does not cover any defect or damage caused by use of non-original accessories or parts.

7:4

Содержание CREATIVE 2.0 -




































































Результаты поиска

Содержание CREATIVE 2.0 -

Отзывы:

Похожие инструкции для CREATIVE 2.0 -

Бренды по названию

Популярные бренды

Pfaff CREATIVE 2.0 -, Руководство пользователя

Результаты поиска

Содержание CREATIVE 2.0 -

Отзывы:

Похожие инструкции для CREATIVE 2.0 -

Бренды по названию

Популярные бренды