Pfaff CREATIVE 2.0 - Скачать руководство пользователя страница 51

Страница: 51 / 68

Embr

oidering

Embroidery text editor

An alphabet will be shown automatically when

you have loaded a font. The text editor works just

like sequencing, see page 4:2.
1. Create your embroidery text by selecting letters

using the arrow buttons.

2. Con

rm your selections by pressing OK.

3. Press F1 to change character set.
4. When you want to sew your text, press the F2

button to bring the text to embroidery stitch-

out. The text will now have the appearance of

the loaded font.

5. Use the + and - buttons to adjust the length

and height of the text.

Note: Press the sequencing button to enter the text

editor again. All adjustments made in embroidery mode

will be cancelled if you go back to the text editor. A pop-

up will therefor appear asking if you wish to returm to

embroidery stitch out. If you select yes you will return

to embroidery mode and all your adjustments will be

kept. If you select no the text editor will open and all

your adjustments made in embroidey mode will be

cancelled. Select yes or no with the arrow buttons and

press OK.

Stitches left in color block (1)

This number shows the number of stitches left

in the current color block. In brackets is the total

number of stitches left in the design.
Press the + and - buttons to step forward and

backwards stitch by stitch in the design. Step

backwards a few stitches if the needle thread

breaks or runs out.

Current color (2)

The current color block number will be shown,

next to the total number of color blocks in the

design, shown in brackets. To go to the next color

block, use the + and - buttons.

Orbit to check position (3)

Orbiting can be used to trace the design area. Press

the F1 button to move the hoop so the needle is

placed in the upper left corner of where the design

will be embroidered. Each press of the button will

move the hoop to view all corners of the design.

On the

fth press the hoop will move to the center

position of the design and on the sixth press it will

move back to its original position.

6:3

Содержание CREATIVE 2.0 -




































































Результаты поиска

Содержание CREATIVE 2.0 -

Отзывы:

Похожие инструкции для CREATIVE 2.0 -

Бренды по названию

Популярные бренды

Pfaff CREATIVE 2.0 -, Руководство пользователя

Результаты поиска

Содержание CREATIVE 2.0 -

Отзывы:

Похожие инструкции для CREATIVE 2.0 -

Бренды по названию

Популярные бренды