Pfaff CREATIVE 2.0 -, Руководство пользователя

Страница: 32 / 68

A
B
Sewing
Tapering program
Tapering increases or decreases the width of the
stitch during sewing to create symmetrical or
asymmetrical tapers.
1. Open the tapering program view by pressing
the F1 button.
2. Use the left and right arrow buttons on the
wheel to select beginning or end tapering.
Press OK to turn the setting on or off.
3. Long press OK to open a view with different
angle choices for either beginning or end
tapering. Select the angle you want for your
taper by using the arrow buttons, and press
OK to select.
4. Press the F1 button again to close the tapering
program view. There are mini icons (A) on the
graphic display that will show you if beginning
or end tapering are activated.
5. When tapering is activated at both the
beginning and at the end and you start to sew,
the stitch width will start at 0 mm. It becomes
wider until the selected stitch width is reached.
Sew your desired length and press the reverse
button. The width is reduced until the width is
0 mm.
Note: Almost all stitches can be tapered. When you
try to open the tapering program view for a stitch
that cannot be tapered, a warning sound will be
heard.
Speed control
1. Long press the speed button to open a pop-
up where you can use the left and right arrow
buttons on the wheel to change the sewing
speed.
Note: You cannot select a higher speed than the
default speed.
2. Press the speed button again to close the pop-
up.
3. Press the info button. An icon on the graphic
display will indicate the speed your machine is
set to sew (B).
4. To deactivate the reduced speed, press the
speed button. Press the button again to sew
with the speed you previously selected.
3:4