Pfaff CREATIVE 2.0 - Скачать руководство пользователя страница 57

Страница: 57 / 68

creative

Maintenance

Maintenance

Changing the light bulbs

Your sewing machine is equipped with two light

bulbs. One is placed under the sewing head and

one above the free arm. Light bulbs are available at

your authorized PFAFF® dealer. Change the light

bulbs as described below.

Turn off the main switch.

1 Place the light bulb remover with the deep

hole, marked OUT, around the bulb. Do not

turn the bulb, just pull it out to remove it.

2 When inserting a new light bulb place the

remover with the shallow hole, marked IN,

around the new bulb. Insert the new bulb by

pushing it up.

Cleaning the machine

To keep your sewing machine operating well, clean

it often. No lubrication (oiling) is needed.
Wipe the exterior surface of your machine with a

soft cloth to remove any dust or lint built up.
Wipe the graphic display with a clean, soft and

damp cloth.

Cleaning the bobbin area

Note: Lower the feed dogs and turn off the

machine.

Remove the presser foot and slide off the bobbin

cover. Place the screwdriver under the stitch

plate as shown on the picture, and gently turn

the screwdriver to pop off the stitch plate. Clean

the feed dogs with the brush found with the

accessories.

7:1

Содержание CREATIVE 2.0 -




































































Результаты поиска

Содержание CREATIVE 2.0 -

Отзывы:

Похожие инструкции для CREATIVE 2.0 -

Бренды по названию

Популярные бренды

Pfaff CREATIVE 2.0 -, Руководство пользователя

Результаты поиска

Содержание CREATIVE 2.0 -

Отзывы:

Похожие инструкции для CREATIVE 2.0 -

Бренды по названию

Популярные бренды