Controls
7 - 3
7
.05
Lever for lifting the roller presser
●
The roller presser is raised by turning
lever
1
.
Fig. 7 - 06
4
2
3
1
1
7.
06
Edge trimmer -725/04
Switching on the edge trimmer
●
The knife is brought into start position
and the edge trimmer is switched on by
pushing lever
1
to the rear until it
engages.
Switching off the edge trimmer
●
The edge trimmer is switched off and
the knife is swung to the rear by
pressing lever
1
.
Switching on the edge guide
●
The edge guide is brought to starting
position by swinging in the edge guide
2
and pressing lever
3
.
Switching off the edge guide
●
The edge guide is put out of operation by raising it until it engages.
●
The edge guide swings to the rear when lever
4
is raised.
Do not reach into the area of the working knife. Danger of injury!
Fig. 7 - 07