Sewing
End bartack
- When pressed once the
single
end-bartack is switched on.
- When pressed again a
double
end-bartack is switched on.
- Activating a third time switches the end bartack back off again.
Stitch length
This function opens a direct menu for inputting the desired values for the stitch lengths.
10
.02
Sewing with the fixed programs
Fixed programs are stored at program numbers 1 and 2.
The fixed programs are used for the fast and comfortable sewing of seams with varying
stitch lengths and/or levels of fullness.
The programs have 2 or 3 seam sections which you can switch between with the knee
switch. They are designed as rotary programs and are completed by activating the pedal
(see
chapter 10.04 Decorative seams)
.
●
Turn the machine on.
1
2
3
4
5
6
7
9
0
Enter
8
Esc
Clear
Fig. 10 - 02
2
or
1
Enter
Fig. 10 - 03
In the text line you will see a stylized seam behind the number of the current
seam section. Up-dating of the text line on a change of section is enabled or
disabled in the input menu under SERVICE / SEWING MOTOR / SEAM WITH
MOTOR RUNNING ( see chapter
11.09 summary of the service functions
).
1
2
3
4
5
6
7
9
0
Enter
8
Esc
Clear
●
Switch on the bartack functions
start/end bartack
if desired.
●
Select the function
select program
.
●
Input program number
1
or
2
.
●
Confirm the entry with the
Enter key
.
10 - 2
