11 - 26
Programming
●
Program the fifth ( last ) seam section:
The seam section should have
- a double end-bartack ( 1 stitch forwards and reverse ),
- stitch counting ( 5 stitches ),
- a stitch length ( for roller presser and feed wheel ) of 2.5 mm
- and trim the thread at the end of the seam section.
Fig. 11 - 51
●
Select the
bartack menu
function (
number key 8
).
●
Double click on the
double end-bartack
function (
number key 3
).
1
2
3
4
5
6
7
9
0
Enter
8
Esc
Clear
Fig. 11 - 52
2 - SPEED
1500
3 - STITCHES FORWARDS
03
4 - STITCHES REVERSE
03
Enter
Enter
1
3
1
Enter
4
Enter
# 5
NO. OF STITCHES 0
●
Select the STITCHES FORWARDS function.
●
Enter the number of stitches.
●
Confirm the input by pressing the
Enter key
.
●
Select the STITCHES REVERSE function.
●
Enter the number of stitches.
●
Confirm this number by pressing the
Enter key
.
●
Finish the inputting of the bartack values by pressing the
Enter key
.
●
Switch on the
double end-bartack
function (
number key 3
).
●
Confirm the bartack functions by pressing the
Enter key
.
1
2
3
4
5
6
7
9
0
Enter
8
Esc
Clear
