11 - 18
Programming
Needle position
When this function is active, the needle travels to its top position at the seam section end.
When this function is not active, the needle positions itself at its lowest point.
Program end
This function serves to end the seam program. The program data entered is checked.
11
.15
Programming examples
The following display representations are only accurate if no program has been
inputted previously.
11
.15.01
Example of seam programming
The seam to be programmed is:
- to contain 5 seam sections
- and to be saved with the comment "seam 1"
- at program number 7.
●
Select INPUT mode.
Fig. 11 - 26
●
Select the
programming
function (
number key 4
).
1
2
3
4
5
6
7
9
0
Enter
8
Esc
Clear
Fig. 11 - 27
PROGRAM NUMBER: 0
[ PERMISSIBLE: 1 - 99 ]
●
Input program number
7
.
●
Confirm this entry with the
Enter key
.
( Display for inputting comment
Fig. 11-28
appears. )
Enter
7
1
2
3
4
5
6
7
9
0
Enter
8
Esc
Clear
