DISASSEMBLY
Page: 15
Reproduction or translation, even partial, forbidden without the written consent of Peugeot Motocycles
- tool P/N 64706 fitted with plate P/N 750369,
fix the plate to the casing using 2 bolts (4) (Ø5 x 40
mm) using the 2 holes in the stator plate
- Tighten the tool screw P/N 64706 until the casings
separate
To remove the crank assembly
Special tooling required
- Protective cap P/N 69098
- Casing extraction and opening tool P/N 64706
- Casing opening/closing plate P/N
- Casing opening/closing bush P/N 69137
+ Have to hand 2 bolts and nuts Ø 6 x 80 mm
- On the LH casing on the clutch side, fit:
- bush P/N 69137 (small diameter side)
- protector P/N 69098 on the end of the crank
assembly
- tool P/N 64706 fitted with plate P/N 750369,
fix the plate to the casing with 2 bolts (5) (Ø 6 x 80
mm) using the casing assembly holes
- Tighten the tool screw P/N 64706 until the crank
assembly is withdrawn completely
