REASSEMBLY
Page: 27
Reproduction or translation, even partial, forbidden without the written consent of Peugeot Motocycles
Prepare the following assembly:
- fit the 4 previously greased balls (8) to the
thrust plate (9)
- fit the plate (7) to the thrust plate (9)
- Turn the assembly over and fit the lining (6)
Note:
the spring legs should be inserted in the slots
(A) in the plate (7)
- Fit the countersunk washer (10) to the plate (with
the countersink on the casing side)
- Fit the spacer (11)
- Lock the assembly with tool P/N 69142
- Fit the spring washer (12) over the countersunk
washer (10)
- Fit the pulley (1) lining up the lining drive
notches (6) with the cup drive notches cup drive
notches (1C)
- Turn the assembly alternately in order to
synchronise the pulley notches (1) with the lining
drive notches (6)
- Fit the spring washer (13)
- Fit the washer (14)
- Fit the nut (15)
- Tighten the nut to the recommended torque
