42
Error messages.
Message
Meaning/possible cause
DISKERR
A Disk Error (a problem with the CF card) has been detected.
This can be because there is no card in the CF slot. The card
in the CF slot can also be defective or the card may need to
be formatted.
NO PART
No partition found on the CF card. The card may not have
been formatted.
DISK FULL
There is no space left on the CF card to make further
recordings.
OVERFLOW
The data cannot be written to the CF card fast enough, so
some samples were lost. The recording is interrupted.
This may occur if the CF card has too low a write speed.
UNDERFLOW
The memory buffers for recording or playback are not filled
fast enough.
CF ERR xx
An error has occurred accessing the CF card. xx is a number
describing the error type, as reported by the CF card.
P ERR xx
An error has occurred while playing a file. This may be
because the file does not contain any data or is in an
unexpected format. xx is a number describing the error type.
ABORTED
A recording was aborted since the internal memory buffer
had not been filled completely. At low sampling frequencies
filling the buffer will take a few seconds. Also, do not
interrupt
a
recording
while
the
display
shows
“BUFFERING”.
Note: To clear any error message, press the ENTER key. If this does not help, wait a while,
then toggle the Main Power switch off and on and restart the detector.
