37
The D1000X Utility software
The D1000X Utility software is a Windows program to facilitate the use of the CF cards with
the D1000X. This program is used to:
•
Create D1000X profiles and transfer these onto the CF card
•
Create D1000X play lists and transfer these onto the CF card
•
Transfer D1000X firmware upgrade files to the CF card
The first step in using the D1000X Utility is to select the drive that has the CF card. This is
done in the “Select CF card” section in the D1000X Utility main window. Please make sure
you select the correct drive or the following operations will be performed on a disk in a drive
you did not intend.
Recorded data files
Clicking on Info will display some information from the file, e.g. the GPS data, if any.
Clicking on Clean file will remove the extra information that is stored in the file (e.g. GPS
data). This information is stored at the beginning of the file and can be seen in the
spectrogram or oscillogram as a very short transient. Usually, this transient is so short that it is
