Permobil Trax, Руководство по обслуживанию

Страница: 56 / 64

Cable laying
56
CII/Trax arm rest
1. Under the arm rest, the cable must be
laid in a loop before it is tied. See the
figure to the right.
2. Check that the arm rest can be tipped
up without the cable being stretched or
damaged.
Cable laying on seats
Cable laying under the CII/T arm rest
(seen from beneath)
Cable laying on the arm rest (seen from the side)
Cable laying behind the seat (seen from the rear)
Trax seat
1. Fix the cable at the very front of the
panel holder tube.
2. Then tie it at the base of the arm rest
tube.
3. Lay the cable in a loop under the arm
rest and tie it to the panel holder tube.
4. Check that the arm rest can be tipped
up without the cable being stretched or
damaged.
Trax seat
1. Connect the panel cable to the bus
socket.
2. Lay the cable in a loop and tie it with a
few cable ties as shown in the figure to
the right.
3 Check that the arm rest can be tipped
up without the cable being stretched or
damaged.