Permobil Trax, Руководство по обслуживанию, Страница: 10 / 64

Changing the batteries
10
Changing the batteries
NB. Use protective goggles when working with
batteries.
Removal
1. Place the wheelchair on a level base.
Raise the seat to its highest position.
If the battery is completely discharged, it is
possible to crank the seat lift up using the
hexagon head bolt or Allen screw.
The screw is located at the front under the
seat. See "Raising the seat lift" on page 6.
If the chair has a fixed seat bracket/tube,
loosen the rear screw, see page 7, and the
seat can be tipped forwards.
2. Switch off the power on the manoeuvring
panel and then switch off the electric circuit
using the battery cut-out.
3. Remove the cover, which is held in place
by four screws. See page 7.
4. Disconnect all battery connections, the
positive poles first and then the negative
poles.
5. Loosen the straps which hold the batteries
in place. Fold the front straps forwards
over the front of the battery box.
Check that the clamping bow remains in
position when the strap is loosened. See
the top figure.
Lift out the batteries. Use the batteries
handles.
Battery connection, rear poles
Front
Battery connection, front
Front
First switch off the power on the manoeuvring
panel before switching the power off on the main
fuse.
Clamping
bow
WARNING!