Permobil Trax, Руководство по обслуживанию

Страница: 43 / 64

Changing the seat swivel direction
43
Changing the seat swivel direction
Electric seat swivel
1. Raise the seat lift and unscrew the seat.
NB. Before the seat can be lifted off, the cable
between the seat and the chassis must be
disconnected. Disconnect the cable from the
connection on the back. Loosen the centre screw
and lift off the seat.
Centre screw
Decal location
Seat swivel drive
Turn the swivel stop
2. Under the seat on the seat plate is a decal which
shows how the swivel stop should be mounted.
NB. On chairs which are equipped with a Trax
seat, it is necessary to remove the plastic shell in
order to be able to reach the screws on the top of
the seat plate.
Loosen the four screws which hold the plastic
seat. See page 38.
Swivel
stop
Swivel stop decal
3. The decal shows how the swivel stop should be
mounted for right or left swivelling.
Loosen the two screws on the swivel stop and
turn the swivel stop. Screw in place again in the
new holes.
Check when mounting that the drive is on the
correct side of the swivel stop.
4. Refit the seat and connect the cable to the rear
of the back.
NB. The seat swivel direction must be changed
in Mini-Config.
New
holes
5. Changes in Mini-Config.
Start Mini-Config.
Hold down the LIGHTS and MAX. SPEED
buttons when the chair is started with the ON
button.
Set the parameter value:
Press the max. speed button until 2 lamps light.
Select the seat swivel direction:
Move the joystick sideways to change the seat
swivel direction from RIGHT to LEFT (standard
value is right), i.e. from 1 to 0.
Parameter value 1 = Right, i.e. the battery
indicator is on.
Parameter value 0 = Left, i.e. the battery
indicator is off.
Exit Mini-Config.
Press down the ON button.
Press down the ON button again to store the
setting in the "active area".
Repeat and store the setting in LED 1, LED 2
and LED 3, i.e. LIGHTS, L. INDICATORS and
SEAT UP, as well, so that the function is
guaranteed in all parameter sets.
NB. For more detailed information, see page 53
or the Mini-Config. instructions for use.
Drive