Permobil Trax, Руководство по обслуживанию

Страница: 53 / 64

Fitting accessories
53
9. Screw the lower part of the luggage box to
the mounting sleeve. See the figure to the
right.
For standard fitting, the lock is turned out
from the wheelchair. Use five M6x25 screws
and washers and locking nuts.
10. Push the luggage box's hooks in under the
mounting's bar. Open the box and press the
palm of your hand against the base of the
box so that it locks in the right position.
Mounting the lower part of the box
Luggage box
Bar
Use the spanners to lock both the lid on the box
and the box to the mounting.
NB. The lower part of the luggage box can be
turned through 180° on the mounting sleeve so
that the lock faces the seat, i.e. forwards.
M6x25
Fitting the mounting plate
Luggage basket
Mounting plate
Mounting sleeve
M5x10
1. Proceed as described in points 1-9 on the
previous page.
2. Place the mounting sleeve on the mounting
and fix it with the two quick-action locks.
Screw the luggage basket's mounting plate to
the mounting sleeve. The mounting plate is
screwed in place from beneath. Use three
M6x12 screws and washers.
3. Screw the basket in place with four M5x10
screws and washers from the side. See the
bottom figure to the right.
Also see Assembly Instruction PAB 3275.
Fitting the luggage basket