Permobil Trax, Руководство по обслуживанию

Страница: 51 / 64

Fitting accessories
51
Fitting the crutch holder
1. Screw the mounting in place in the holes on
the right or left side of the chassis. Use 3
M5x12 and plain 5.3x10x1.0 washers.
NB. An extension sleeve must be used
when the crutch holder is fitted on the power
steering side in order to place it away from
the adjustment device.
2. Push the crutch holder as far as possible
onto the mounting. Tip the crutch holder
down towards the rear mudguard. Drill a 5.5
mm hole through the finished hole in the
crutch holder down through the rear
mudguard. Screw the crutch holder in place
on the rear mudguard using an M5x16
screw and plain 5.3x15x1.5 washers and an
M5 locking nut.
3. The screw for the extension sleeve is
always fitted at the outer end of the
mounting. If the mounting is fitted on the
right side without a joystick, the extension
sleeve does not have to be used.
NB. If a bow is fitted on the wheelchair, the
crutch holder cannot be fitted with this
mounting.
Other information
The Velcro tape for holding the crutches is
reversible. This means that the crutches can
always be released easily regardless of
whether they are fitted on the right or left
side.
Also see Assembly Instruction PAB 3263.
Fitting the foot plate insert
1. The foot plate insert is screwed in place in
the holes provided in the foot plate on the
front wheel assembly.
Fitting the rear-view mirrors
1. The rear-view mirrors are screwed to the
front mudguards with three screws.
Crutch holder
Crutch holder with mounting
Drill through the
rear mudguard
through the
existing hole
The mounting is
screwed in place in
the existing holes
on the side of the
battery box
The mounting
is screwed in
place in the
holes
Screwed to
the rear
mudguard
Mounting of the rear-view mirror