Remove / Replace Idler Pulley
1 Remove idler pulley using 5/16” Allen wrench and 9/16” wrench
2 Replace with new idler pulley assembly
3 Tighten bolts
4 Pack top of bearing with grease and replace seal
TOOLS
5/16” Allen wrench
9/16” wrench
Replacing Clutch Arm
1 Remove eye bolt with 7/16” nut driver and disconnect the spring
2 Remove 3/8” hair bin from the pivot pin
3 Push in 3/8” clevis pin all the way through, which will remove clutch arm
4 Line up new clutch arm with clutch arm bracket
5 Push in clevis pin and lock in with 3/8” hair pin
6 Install spring
7 Apply thread locker and tighten the eye bolt with 7/16” nut driver
TOOLS
7/16” nut driver
Pliers
© 2004 Perma Green Supreme, Inc. All rights reserved.
DOCUMENT ID: U005M
page
10
