© 2004 Perma Green Supreme, Inc. All rights reserved.
DOCUMENT ID: U005M
Clutch Removal & New Installation
1 Remove drive belt
2 With channel locks, grab between spring and pad of clutch
3 With 9/16” socket, remove bolt from clutch
4 Remove lock washer, hardened cap washer, (2) spacer bushings, and seal
5 Remove clutch with pulley puller positioned around drive belt pulley
6 Clean shaft, apply anit-seize to shaft, and install new clutch assembly
7 Install clutch seal
8 Install (2) spacer bushings
9 Install hardened cap washer, lock washer, and bolt
10 Tighten down 9/16” bolt
11 Replace drive belt
TOOLS
9/16” socket wrench
Channel locks
Flathead screwdriver
Pulley puller
Anti-seize formula (hardware store)
page
9
