© 2004 Perma Green Supreme, Inc. All rights reserved.
DOCUMENT ID: U005M
Replacing the Drive Belt
1 Push clutch pulley arm to left front side of machine and hold
2 Take old belt off starting from transaxle pulley first
3 Put on new belt starting by slipping over clutch pulley first, then transaxle pulley
4 Release clutch arm
TOOLS
none
Change Engine Oil
1 Top nose on its front end (nose)
2 Using 3/8” socket extension, loosen ONLY the drain plug (D)
3 Place wheels back on ground
4 Slide flat oil pan under and remove drain plug
5 After completely drained, reinstall drain plug
6 Refill with oil (22 oz. or .65 liters) SAE 30, 5W-30, or 10W-30 depending on temperature
TOOLS
3/8” socket extension
Flat oil/collection pan
page
8
